◆ Contact-type pneumatic axial measuring head model QJC-1,QJC-2:
This is applied to enforce comparative measurement of height or thickness.
Clamping size: Φ8h7 mm
|
|
◆ Through-hole ID measuring head and counter gauge Model A-QCN、A-QSN:
Φ3～Φ150mm
Being fitted with float-type pneumatic measurer. Length of hole to be measured: >6.5mm
Note: If the length of hole to be measured is over 70mm that should be marked to choose suitable handle.
|
|
◆ Blind hole ID measuring head and counter gauge Model B-QCN、B-QSN:
Φ3～Φ150mm
Length of hole to be measured: >8mm
Note: If the length is over 70mm that should be marked to choose suitable handle.
|
|
◆ OD measuring head and counter gauge Model P-QCW、P-QSW:
Φ4～Φ12mm
Width of the surgace measured should be over 5mm. |
|
◆ OD measuring head and counter gauge Model M-QCW、M-QSW:
Φ4～Φ120mm
Note: The lenght of stepped shaft should be over 8mm.
|
|
◆ Shallow blind hold ID measuring head and counter gauge Model BD-QCN、BD-QSN:
Φ3～Φ100mm
It is specially used to measure shallow blind hole and stepped hole (depth be over 5mm).
|
|
◆ Narrow-surface through-hole ID measuring head and counter gauge Model QTC :
Φ4～Φ40mm
Width of the surface measured: >5mm。
|
|
◆ Slot width measuring head and counter gauge Model QKC、QKS:
1.8～3mm Depth of slot being measured:＞7mm
3～12mm Depth of slot being measured:＞8mm
12～40mm Depth of slot being measured:＞8mm
|
|
